I know that headline may sound a little hyperbolic, but hyperbole is sort of the fuel that powers DARTZ, the Latvian company that has made more whale-penis-leather-upholstered SUVs than anyone, among other things. But that was a long time ago, and DARTZ has hardly sat still since then, dabbling in opulent small EV roadsters and more huge, armored SUVs, fit for despots and decadent royals. And now, thanks to a dream had by DARTZ’ Inheritor-Founder Leonard Yankelovich, I think DARTZ has done something with grille design that genuinely has never been done before, and that’s a big deal, so let’s check it out.
In modern automotive design, the radiator grille does a lot of work in giving the front of the car a distinctive “face” and brand identity, and while there have been a vast array of grille designs for the well-over-a-century we’ve been building cars with radiator grilles, and yet in all that time grilles have remained generally pretty two-dimensional swaths of pattern or brightwork in between the headlights.
But, as I said, I think DARTZ has come up with something new. From DARTZ’ press release:
The challenge was daunting: how to create a grille that speaks both to the future and the past. Inheritor-Founder and visionary Leonard Yankelovich reflected on this dilemma for two decades, attempting to design something truly groundbreaking. But each idea, though novel, felt like an iteration of something already seen—unacceptable for a brand as iconic as DARTZ.
Inspiration struck in the most unlikely place—while sleeping on a beach. The vision that emerged was bold: a Picassian Sliced grille, a radical break from convention, symbolizing DARTZ’s new brand identity, *The Spirit of Victors*. This grille, more than a mere adornment, is a statement—an artistic piece designed not just for aesthetic impact but to carry the brand’s legacy forward.
You can definitely tell that DARTZ hired a new “PR Attaché.” Here’s some more:
The new grille, dubbed *The Car Grille as a State of Art*, is crafted from a special lightweight, bullet-protected composite—another nod to DARTZ’s military origins. Coated in 24-karat leaf gold, applied by the hands of A.C’machoff, the Supreme Leader of D’ARTZ DeepART’ment, this grille transcends function. It is more than a mosquito catcher or a brand label holder—it’s a statement piece, a work of art.
What makes this grille unique is its Picassian Sliced design, which deconstructs traditional forms in a way reminiscent of Cubist art, a style integrated into all DARTZ car designs. Yet it remains fully grounded in the forward-thinking spirit of the brand. At once modern and timeless, this grille can stop more than bugs—it’s designed to stop bullets, a powerful symbol of DARTZ’s enduring connection to its military heritage.
Picassian! If I may employ my otherwise useless Art History degree, I’d say this may be less (analytical) Cubist and more, constructivist? Maybe even Italian Futurist? Okay, okay, let’s just see what this thing actually looks like, already:
Okay, that is pretty damn cool. And I’m just about certain I’ve never seen another automaker take this approach, where the grille slats themselves are sculpted dimensionally to form a three-dimensional object formed by the grille slats themselves, and still allowing airflow through the three-dimensional form.
Here’s what the grille’s components look like prior to assembly:
…and here’s what it looks like all together:
How has no one thought of trying this before? The effect is so striking, I feel like in some alternate universe 1960s Thunderbirds would have had grilles that used this method to give the illusion of a huge, powerful Thunderbird lurking within the grille, or perhaps A Lincoln Town Car would have met traffic with a rendering of Lincoln’s face in chrome grille slats.
The skull-in-aviator’s helmet is actually a tribute to two figures that DARTZ has historical ties to:
Blending iconic imagery from two legendary figures in RBVZ JV’s history, the brand identity pays homage to helicopter godfather Igor Sikorsky, who began his career as an engineer at RBVZ JV in Riga, and André Nà gel, the famed racer who set records at the 1912 Monte Carlo Rally.
I’m very delighted by this; yes, it’s faintly absurd, sure, and it’s definitely over the top, but how often do you see something genuinely new and novel in the world of automotive design? And something that’s just unapologetically fun, because life is for the living, dammit.
DARTZ will be coming to America with their Prombron’ Black Stallion CLV being shown in Los Angeles quite soon. This new grille design won’t be seen on that car, as this is brand new; in fact, I’m proud to say we have this world-shaking grille news before anyone else.
Will this bold grille design concept be stolen by other carmakers soon? Will this remain a DARTZ exclusive? Will the future be defined by cars with grilles that harbor three-dimensional figures, perhaps like the mermaid figureheads on sailing ships of yore? Will this usher in a bold new age of automotive gargoyles and other fun stuff?
I sure as hell hope so.
If I were A.C’machoff, I would amend my title to Dear Leader of D’ARTZ DeepART’ment.
The name for this type of design I believe is parametric. One takes a three dimensional object and slices it either horizontally or vertically into even size pieces just as Darts has done here. Similar to how stereo lithography scans and prints an object. Since BEV’s don’t require grills like piston engines do I’m all for BEV’s ditching these vestigial remnants ASAP. While. Dartz can take credit for this grill but the company as a whole just screams BLD (Big Loud and Dumb) to me.
This is not for me. That’s fine. There are many things for many different people. I may, however, make some assumptions about you if this is on your car.
Just because everyone else seems to be hating: this is great and I hope other people do even cooler/less military stuff with it(and execute better)
It seems that most folk take issue with Dartz’s specific choice of grille emblem, but hey, that’s just Dartz being Dartz.
I agree with you that the idea is great and hopefully won’t be completely co-opted by the angry incel crowd. I can definitely see Japanese car culture going all-in with some hopefully weird and wonderful over the top results.
I genuinely kinda want to see what my Thunderbird would look like with a grille like that, just with the grille looking like an actual, you know, thunderbird and not a skull, as Torch suggested.
What I like about this art style is how accessible it is. A lot of shops have plasma cutters and whatnot which could totally make those shapes.
Is it April first already?
Tacky, stupid, childish and badly rendered. Let’s take it off the water-jet machine and plate it in gold without doing anything to clean up the rough edges of the cuts. Actually, gold plating is beyond our technical skills so we’ll cover it in gold leaf like it’s a damn medieval statue or something.
I don’t see the gold leaf there, but I agree completely as far as: the entire grille (both the face, and the plain slats making up the normal parts at the sides) are raw, unsmoothed waterjet leavings, of various textures depending what seems to be varying cutting speed or cutting fluid and abrasives. The poor quality of water jet-cut edges is the reason that, aside from here, they are generally obscured. Or cleaned up.
I feel like this should be a clown face and installed on a large semi-tractor. Can’t imagine why I’d think that…
The grill offers zero performance improvements, and zero fuel efficiency improvement. It looks expensive and easily broken. No thanks. Fun article and fun to talk about. Just don’t see it selling well here. Reminds me of the neon lights some guys put under their cars… bleh
‘..don’t see it selling here..’
Really. In the land of truck nutz and skull decals?
DARTZ marketing meeting. We rely on outrageous publicity but we’ve been upstaged. Find a way to out-aggro the Lexus Predator, Jeep Scowl, and BMW Angry Beaver grills.
Sophomoric at best. Which is probably why no one else has pursued it.
Can we get a zoomed out shot?
Why are they using Autodesk?
I don’t get it, nor do I think I ever will.
I presume that is Autodesk Inventor, which is both parametric and heavy-duty instead of standard Autodesk, but other than that I do not get it either.
Could be Fusion 360.
I have to admit that I had never heard of DARTZ so I looked it up. From their Wikipedia page…
“In 2009, Dartz attained notoriety with its Prombron model, in part because it was originally available in upholstered leather made from the foreskins of whale penises“
Yah was wondering if they offered to wrap the grille in that stuff
I’m shaking in my custom Whale Weiner leather boots.
What an amazing new way of making a grille! Definitely brand new and never used before.
Although, back in 1966, the Lamborghini Miura hood grille was made from parallel slats that were all different shapes to form a three-dimensional object. Of course they didn’t use it to put a skull on their car because they were too classy, but instead just used to to make a grille.
Is the Lambo grille a bit square and boring? Maybe, but each of the 27 slats each side is a fractionally different shape to form the subtle curves. I met a man who rebuilt one twice, having got some slats out of position during assembly the first time.
The Lambo slats aren’t tackily gold-plated without first polishing out the laser-cutting marks crudely left on the plates. They were hand finished by artisans instead, because classy.
Wow, didn’t know that Picassian was an adjective.
Jason, you know I love you, but aside from the sculpture image having vaguely Nazi SS undertones, I’m not sure it’s much more than a 3D printed assemblage using some possibly fancy filament with gold leaf applied to hide the inherent surfacing flaws of many printed items. As such, my collection reaction is, Meh.
Laser cut from sheet. If they’d 3D printed them it wouldn’t look so crude and low-res.
You know what must be done — The Iacocca!
What faces would adorn other brands?
Ford- Henry, with a copy of the Dearborn Independent
Cadillac- some French dude with a fancy mustache and feathers in his hat
Mercedes-Benz- Bertha. No, not Hitler.
BMW- the faces of the entire population of Bavaria. There’s plenty of room
Fisker/Lucid/Lordstown/Rivian- Peter Francis Geraci
Subaru- your mechanic, with a shit-eating grin on his face
Tesla- Elon Musk, doing unspeakable things to himself
VW – Okay, yes Hitler this time
Oh, geez, not that tired and debunked trope. (Exasperated sigh) The Beetle was simply an idea whose time had come, thanks to the passions of people like Josef Ganz, Hans Ledwinka, and Ferdinand Porsche, which then was misappropriated by Hitler who had basically nothing to do with the Beetle itself. If anything, VW would have Ganz, Ledwinka, Porsche, and even Ivan Hirst, Ã la Mount Rushmore.
Now I just want to see actual Mount Rushmore in car grille form on something American.
Tesla would be Pepe.
So much this. I can see a Pepe retrofit grill for the CT having a large take rate among a certain subset.
Why are you all up in my grill?
Grilliant!
I like like Dodge is considering how it might appropriate the idea.
“Yeah, this ‘fratzog’ thing – whatever that is – is fine, heritage and all, I get it, but people, SKULLS! Skulls that light up maybe? I’m sure we could license Vin Diesel’s head…”
Dang, I was hoping for Megatron.
Nice scoop!
Very fascist. Reminds me of the Mussolini face facade on the Palazzo Braschi.
Only acceptable if the car comes with these bad boys
please god no
Even Jeep doesn’t deserve that!
Yikes
On the one hand, I can’t think of any car I’d unironically put those on. On the other hand, those are the least cringe LED headlights I’ve seen so far, and at least actually do something interesting and creative with their LED-ness, rather than just making “round headlights, but 1,000 times uglier for no reason.” These are still uglier, but with novelty value!
I think the best use of one of those would be as a third center headlight, so it looks more like a fancy light-up badge, but also contributes towards lighting the road.